Peng Liang is an associate professor and postgraduate supervisor. He is also a member of the youth working committee of the Tribology branch of Chinese society of Mechanical Engineering, the high-level and scarce talents of Huangdao District, the "Lixian scholar" young talent, the communication reviewer of the National Natural Science Foundation of China, and a member of the expert database of AEIC. He has published more than 22 papers, including 15 SCI / EI papers. He has applied for 10 patents and authorized 6. He has presided over many national and provincial natural science funds.

Research field：

1. Mechanism and application of water lubricated bearing;

2. Ultrasonic measurement mechanism and device development of oil film thickness;

3. New machining method of non-circular parts;

1.曹玉哲, 梁鹏, 郭峰, 张晓寒, 王超, 姜芙林. 不同工况下表面粗糙度对水润滑轴承启动性能的影响[J]. 推进技术,2022.

2. Liang P, Li XY, Guo F, Cao YZ, Zhang XH, Jiang FL. Influence of sea wave shock on transient start-up performance of water-lubricated bearing[J]. Tribology international, 2022.

3.Zhang Y, Yu S, Lu C, Zhao H, Liang P. An improved lumped parameter method for calculating static characteristics of multi-recess hydrostatic journal bearings[J]. Proceedings of the institution of mechanical engineers part j-journal of engineering tribology,2020,234(2):301-310.

4.Liang P, Lu C, Yang F. Optimal control simulation of elliptical shaft center orbit with the hydraulic servo system[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2019,233(2):610-624.

5.Wang L, Zeng Q, Lu C, Liang P. A numerical analysis and experimental investigation of three oil grooves sleeve bearing performance[J]. Industrial Lubrication and Tribology, 2019, 71(2):181-187.

6.Zhang Y, Lu C, Zhao H, Shi W, Liang P. Error Averaging Effect of Hydrostatic Journal Bearings Considering the Influences of Shaft Rotating Speed and External Load[J]. Ieee access, 2019,7:106346-106358.

7.Liang P, Lu C, Yang F. A fast computing approach concerning recess pressure[J]. Industrial Lubrication and Tribology, 2018, 70(1):1-7.

8.Liang P, Lu C, Yang F. Influences of radial clearance and ovality on performance of elliptical hydrostatic journal bearing[J]. Journal of the balkan tribological association,2016,22(3):2198-2209.

9.Liang P, Lu C,  Yang F, et al. Open-loop control of elliptical shaft center orbit[J].  Proceedings of the Institution of Mechanical Engineers Part B Journal of  Engineering Manufacture, 2016, 230(10)：1818-1833.

10.梁鹏, 路长厚, 杨发展. 静压主轴轴心轨迹的主动控制[J].机械设计与制造, 2016, (8):178-181.

11.Liang P, Lu C, Yang F. Study on static performance of a new type of standard elliptical four-pocket hybrid journal bearing[J]. Journal of the balkan tribological association,2015,20(4): 1010-1016.

12.Liang P, Lu C, Pan  W, et al. A new method for calculating the static performance of  hydrostatic journal bearing[J]. Tribology  International, 2014, 77(6):72-77.    

13.Liang P, Lu C, Ding J, et al. Study on movement forming methods for the machining of elliptic-shaped holes[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014, 228(4):515-526.

14.Liang P, Lu C, Ding J, et al. A method for measuring the hydrodynamic effect on the  bearing land[J]. Tribology International, 2013,  67(4):146-153.

15.Liang P, Lu C, Ding J, et al. Study on movement forming methods for the machining of  elliptic-shaped holes[J]. Proceedings of the Institution of Mechanical  Engineers Part B Journal of Engineering Manufacture, 2013, 228(4):515-526.

16. Liang P, Lu C, Chen S, et al. The Stability’s Influencing Factors and Active Control  of Hydrostatic Journal Bearing[C]. 2nd International Conference on Electronic   & Mechanical Engineering and Information Technology, 2012：730-733.